The destructive Deep Impactinvades unknown deep areas !

The IK500R2 has the same breathtaking castability as the Imakatsu crank series, and has finally succeeded in consistently exceeding the 5m depth barrier (measured by casting 30m with 10-pound line). Dragging allows you to tackle depths of over 8m. The not-too-showy wobble roll and the comfortable pull that firmly grips the water even when pulled very slowly allow you to penetrate the targeted spot without scooping big bass that school in the deep, and it has the ability to make even low-activity bass that school in deep water react. Of course, it is designed for riser cranking, which is excellent at avoiding snagging. In addition, the tail hook is equipped with a custom-made quad-point hook (4 hooks) as standard. When bottom knocking, the bass will go around to the front of the lure and cannot suck it in, so it often sucks it in from behind, and the lure often gets caught on one tail hook.

With the Quattro Point Hook, if even one rear hook is hooked, the hook shanks on both sides will fix the hook from swinging left and right, preventing it from swinging too much when the head shakes. Therefore, even with only one rear hook, which is the most common type of crankbait to get away, the hook-off rate at the side of the boat is greatly reduced, achieving a high catch rate. For deep cranks, try the authentic deep diver IK500R2 from Imakatsu, which has the best track record and experience, and challenge yourself to catch big fish in the deep sea.

Length – 3″
Weight -.88 oz
Depth – up to 26 ft