Daho Threading Splicing Needle 10-20#
Daho Threading Splicing NeedleDaho Threading Splicing Needles are hollow inside, except for the point, so monofilament or fluorocarbon line can be inserted into the needle. Then, the needle with the internal mono/fluorocarbon line, is inserted, or threaded
Daho Threading Splicing Needle
Daho Threading Splicing Needles are hollow inside, except for the point, so monofilament or fluorocarbon line can be inserted into the needle. Then, the needle with the internal mono/fluorocarbon line, is inserted, or threaded, into the hollow center section of the spectra braid. The needle, and attached mono/fluorocarbon line, is typically inserted inside of the spectra from 3 to 5 feet to provide the best strength of the join. Because of the slick surface of the mono/fluorocarbon line, the end point of the spectra must be finished to secure it to the mono/fluorocarbon line. This finishing is usually done by gluing, serving, crimping, or some combination of these attachments, to the spectra line end. This ensures the join will not slip before the compression pressure occurs in the braid of the hollow spectra line to hold the joined lines together.
Remember that the ID sizes of a threading needles can vary up to 0.002 due to the tube manufacturing process. It is recommended that you select a needle that is at least 0.002 larger than your line for ease of use. It can also be difficult to fit an exact size of line into a needle.
Sold per each
An image showing the detail of both ends of one DaHo Threading Splicing Needle is provided.
| Daho Model# |
Reference Size |
Spectra Sizes |
Tube Length |
Typical OD |
Typical ID |
Minimum ID |
| N02017 | 10 to 20 | up to 60# | 5.3 | 0.025 (0.64mm) |
0.017″ (0.43mm) |
0.015″ (0.38mm) |
| N03020 | 20 to 30 | up to 80# | 5.4 | 0.028 (0.71mm) |
0.020″ (0.51mm) |
0.018″ (0.46mm) |
| N04023 | 30 to 40 | up to 80# | 5.5 | 0.032 (0.81mm) |
0.023″ (0.58mm) |
0.021″ (0.53mm) |
| N05026 | 40 to 50 | 60 to 130# | 5.6 | 0.036 (0.90mm) |
0.026″ (0.66mm) |
0.024″ (0.60mm) |
| N06032 | 50 to 60 | 80 to 130# | 5.7 | 0.042 (1.06mm) |
0.032″ (0.81mm) |
0.030″ (0.74mm) |
| N08038 | 60 to 80 | 100 to 300# | 5.8 | 0.050 (1.27mm) |
0.038″ (0.96mm) |
0.036″ (0.90mm) |
| N10042 | 80 to 100 | 100 to 300# | 5.9 | 0.050 (1.27mm) |
0.042″ (1.07mm) |
0.040″ (1.00mm) |
| N13047 | 100 to 130 | 130 to 300# | 6.0 | 0.058 (1.48mm) |
0.047″ (1.19mm) |
0.045″ (1.15mm) |
| N15053 | 130 to 150 | 200# and up | 6.1 | 0.065 (1.65mm) |
0.053″ (1.35mm) |
0.051″ (1.28mm) |
| N20060 | 150 to 200 | 200# and up | 6.2 | 0.072 (1.83mm) |
0.060″ (1.52mm) |
0.58″ (1.47mm) |
| N30067 | 200 to 300 | 300# and up | 6.3 | 0.083 (2.11mm) |
0.070″ (1.78mm) |
0.068″ (1.73mm) |
| N40077 | 300 to 400 | 400# and up | 6.4 | 0.095 (2.41mm) |
0.077″ (1.96mm) |
0.075″ (1.90mm) |
| N50091 | 400 to 500 | 500# and up | 6.5 | 0.109 (2.77mm) |
0.091″ (2.31mm) |
0.089″ (2.25mm) |
Reviews
There are no reviews yet.